Interface Configuration
7210 SAS M, T, X, R6, R12, Mxp, S, Sx Interface Configuration Guide Page 351
LAG Commands
lag
Syntax lag [lag-id] [detail] [statistics]
lag lag-id associations
lag [lag-id] description
lag [lag-id] port
Context show
Description Platforms Supported: 7210 SAS-M, 7210 SAS-X, 7210 SAS-Mxp, 7210 SAS-Sx/S 1/10GE,7210 SAS-Sx
10/100GE, 7210 SAS-R6, 7210 SAS-R12, 7210 SAS-T.
This command displays Link Aggregation Group (LAG) information.
If no command line options are specified, a summary listing of all LAGs is displayed.
Parameters lag-id — Displays only information on the specified LAG ID.
Default Display information for all LAG IDs.
Values SAS-M,X,T, Mxp- [1..25]
SAS-R6, R12, Sx/S 1/10GE-[1..63]
SAS-Sx 10/100GE-[1..56]
detail — Displays detailed LAG information.
Default Displays summary information.
statistics — Displays LAG statistics information.
associations — Displays a list of current router interfaces to which the LAG is assigned.
description — Displays LAG description strings.
port — Display the LAG ports
Output LAG Output — The following table describes LAG output fields.
Label Description
LAG ID
The LAG ID that the port is assigned to.
Adm Up — The LAG is administratively up.
Down — The LAG is administratively down.
Opr Up — The LAG is operationally up.
Down — The LAG is operationally down.
Port-Threshold The number of operational links for the LAG at or below which the
configured action will be invoked.
To Next Page
Loading...
Need help?
General
