Interface Configuration
7210 SAS M, T, X, R6, R12, Mxp, S, Sx Interface Configuration Guide Page 355
LAG Statistics Output — The following table describes detailed LAG statistics output fields.
LAG
Statistics
Output
Fields
Sample Output
ALA-1# show lag statistics
===============================================================================
LAG Statistics
===============================================================================
Description:
Lag-id Port-id Input Input Output Output Input Output
Bytes Packets Bytes Packets Errors Errors
-------------------------------------------------------------------------------
1 1/1/3 0 1006 0 2494 0 0
1/1/4 0 435 0 401 0 0
1/1/5 0 9968 0 9833 0 0
-------------------------------------------------------------------------------
Totals 0 11409 0 12728 0 0
===============================================================================
ALA-1#
Label Description
LAG ID
The LAG or multi-link trunk (MLT) that the port is assigned to.
Port ID The port ID configured or displayed in the slot/mda/port format.
Input Bytes The number of incoming bytes for the LAG on a per-port basis.
Input Packets The number of incoming packets for the LAG on a per-port basis.
Output Bytes The number of outbound bytes for the LAG on a per-port basis.
Output Packets The number of outbound packets for the LAG on a per-port basis.
Input/Output
Errors
For packet-oriented interfaces, the number of inbound packets that
contained errors preventing them from being deliverable to a higher-
layer protocol. For character- oriented or fixed-length interfaces, the
number of inbound transmission units that contained errors preventing
them from being deliverable to a higher-layer protocol.
For packet-oriented interfaces, the number of outbound packets that
could not be transmitted because of errors. For character-oriented or
fixed-length interfaces, the number of outbound transmission units that
could not be transmitted because of errors.
Totals Displays the column totals for bytes, packets, and errors.