Port Monitor Commands
Page 368 7210 SAS M, T, X, R6, R12, Mxp, S, Sx Interface Configuration Guide
Clear Commands
lag
Syntax lag lag-id statistics
Context clear
Description This command clears statistics for the specified LAG ID.
Parameters lag-id — The LAG ID to clear statistics.
Values SAS-M,X,T, Mxp- [1..25]
SAS-R6, R12, Sx/S 1/10- [1..63]
SAS-Sx 10/100-[1..56]
statistics — Specifies to clear statistics for the specified LAG ID.
mda
Syntax mda mda-id
Context clear
Description Platforms Supported: 7210 SAS-M, 7210 SAS-X, 7210 SAS-Mxp, 7210 SAS-Sx/S 1/10GE,7210 SAS-Sx
10/100GE, 7210 SAS-R6, 7210 SAS-R12, 7210 SAS-T.
This command reinitializes the specified MDA in a particular slot.
Parameters mda-id — Clears the specified slot and MDA/CMA.
Values mda-id: slot/mda
slot: 1
mda: 1, 2 (for 7210 SAS-M)
mda: 1 (for 7210 SAS-X)
port
Syntax port port-id statistics
Context clear
Description Platforms Supported: 7210 SAS-M, 7210 SAS-X, 7210 SAS-Mxp, 7210 SAS-Sx/S 1/10GE,7210 SAS-Sx
10/100GE, 7210 SAS-R6, 7210 SAS-R12, 7210 SAS-T.
This command clears port statistics for the specified port(s).
Parameters port-id — The port identifier.