LAG Hashing Fields used for 7210 SAS-X
Page 64 7210 SAS M, T, X, R6, R12, Mxp, S, Sx Interface Configuration Guide
PBB VPLS service:
PBB BCB Traffic (that is, B-SAP
to B-SAP)
IP traffic (learnt and unlearnt): Source and
Destination IP, Source and Destination L4 ports,
Ingress Port-Id.
L2/non-IP traffic (learnt and unlearnt): BDA,
BSA, ISID, Ingress Port-Id.
PBB VPLS service:
Originating PBB BEB traffic (that
is, I-SAP to B-SAP)
IP traffic (learnt and unlearnt): Source and
Destination IP, Source and Destination L4 ports,
Ingress Port-Id, VLAN.
L2/non-IP traffic (learnt and unlearnt): CSA,
CDA, EtherType, Ingress Port-Id.
PBB VPLS service:
Terminating PBB BEB traffic
(that is, B-SAP to I-SAP)
IP traffic (learnt and unlearnt): CSA, CDA,
Ingress Port-Id.
L2/non-IP traffic (learnt and unlearnt): CSA,
CDA, EtherType, Ingress Port-Id.
PBB Epipe service:
Originating PBB BEB traffic (that
is, PBB Epipe I-SAP to B-SAP)
IP traffic: Source and Destination IP, Source and
Destination L4 ports, Ingress Port-Id, VLAN.
L2/non-IP traffic: CSA, CDA, EtherType,
Ingress Port-Id.
PBB Epipe service:
Terminating PBB BEB traffic
(PBB Epipe SAP to B-SAP)
IP traffic: CSA, CDA, Ingress Port-Id.
L2/non-IP traffic: CSA, CDA, EtherType,
Ingress Port-Id.
VPRN service:
SAP to SAP
SAP to SDP
IP traffic: Source and Destination IP, Source and
Destination L4 ports, Ingress Port-Id, VLAN.
VPRN service:
SDP to SAP
IP traffic: Source and Destination IP, Source and
Destination L4 ports, Ingress port-Id.
Table 9: LAG Hashing mechanism for services configured on 7210 SAS-X devices (Continued)
Services and Traffic Direction
(For example: SAP to SDP)
Packet fields used for Hashing for different
traffic types