Nokia 7368 ISAM CPE - Figure 35 Port Forwarding Window; Table 33 Port Forwarding Parameters

7368 ISAM CPE A-020W-A Product Guide Configure a A-020W-A
Issue: 01 3FE-47511-AAAA-TCZZA 83
Procedure 30 Port forwarding configuration
1 Select Application > Port forwarding from the top-level menu in the Ethernet Gateway
window, as shown in Figure 35.
Figure 35 Port forwarding window
Table 33 describes the fields in the port forwarding window.
Table 33 Port forwarding parameters
Field Description
Application Name Choose an application name from the drop-down menu
WAN Port WAN port range
LAN Port LAN port range
Internal Client Choose a connected device from the drop-down menu and enter the associated
IP address
Protocol Choose the port forwarding protocol from the drop-down menu:
• TCP
• UDP
• TCP/UDP
Enable Mapping Select this check box to enable mapping
WAN Connection List Choose a WAN connection from the drop-down menu
Note: only active devices are shown on this menu
Release 05.08.01 | June 2018 | Edition 01