7368 ISAM ONT E-240G-B Product Guide Install an E-240G-B ONU
Issue: 01 3FE-46261-AAAA-TCZZA 57
6 Install an E-240G-B ONU
6.1 Purpose
6.2 General
6.3 Prerequisites
6.4 Recommended tools
6.5 Safety information
6.6 ONU installation procedure
6.7 ONU mounting in an MNTS-A shelf
6.1 Purpose
This chapter provides the steps to install an E-240G-B ONU.
6.2 General
The procedure listed in this chapter describes mounting and cabling for the
E-240G-B ONUs.
For more information about installing EPON ONUs, see the Operations and
Commands manuals for your OLT.
6.3 Prerequisites
The prerequisites are:
• The ONU software version must be in the NT file system.
• All required cables must be present.
6.4 Recommended tools
You need the following tools for the installation:
• #2 Phillips screwdriver
• 1/4 in. (6 mm) flat blade screwdriver
Release 06.01.01 | June 2019 | Edition 09
To Next Page
Loading...
