Replace an E-240W-A indoor ONT
62
7368 ISAM ONT E-240W-A Product Guide
3FE-46974-AAAA-TCZZA Issue: 01
17 Activate and test the services; see the 7368 Hardware and Cabling Installation Guide.
18 If necessary, reset the ONT.
i Locate the Reset button on an E-240W-A indoor ONT as shown in Figure 17.
ii Insert the end of a straightened paper clip or other narrow object into the hole in the
Reset button to reset the ONT.
19 STOP. This procedure is complete.
Release 06.00.00h | January 2019 | Edition 08
To Next Page
Loading...
