7368 ISAM ONT G-240W-J Product Guide Configure a G-240W-J indoor ONT
Issue: 01 3FE-48009-AAAA-TCZZA 119
Click to enter a source MAC
Click to enter a destination MAC
Click to enter a source IP
Click to enter a destination IP
Click to enter a source port
Click to enter a destination port
Click to enter a protocol
Choose a priority level from 1 to 8. The lower the number, the higher the
priority. No more than 1 classifier can be created with the same priority.
(2 of 2)
7 Configure the US classifier.
At least one field must be selected to create a classifier. A maximum of four fields may be
selected to create a classifier; this includes the interface field.
8 Click Save.
9 To delete a classifier, click the Delete option for the applicable classifier in the classifier
table.
A classifier can only be deleted if it is not associated with any classifier rules.
10 Select the Classifier Rules tab, as shown in Figure 46.
All classifier rules are displayed in the classifier rules table in the window.
To Next Page
Loading...
