Nokia 7368 ISAM ONT G-240W-J - Page 130

Configure a G-240W-J indoor ONT 7368 ISAM ONT G-240W-J Product Guide
130 3FE-48009-AAAA-TCZZA Issue: 01
Access Control
Select this checkbox to enable access control
Add Access Control rule
Policy Name
Enter a name for the parental control policy or choose a policy from the list
MAC Address
Enter the MAC address or choose a MAC address from the list
IPv4 Address
Enter the IPv4 address for the device or choose an IPv4 address from the list
Url Port
Enter the URL port for the device
Days of week
Choose Every Day, or Individual Days and select the checkboxes for the days of the week
for which the policy applies
From
Enter the times for the policy to be in effect
To
3 Click on the plus sign (+) to add a policy.
A separate panel displays for configuring the policy name, IP address of the device, and
dates and times for the policy.
Procedure 33 DMZ and ALG configuration
1 Select Security > DMZ and ALG from the top-level menu in the GPON Home Gateway
window, as shown in Figure 52.
2
Select the Access Control checkbox.
4
Configure the parental control policy.
5
Click Enable to activate the policy.
6
STOP. This procedure is complete.