Nokia 7368 ISAM ONT G-240W-J - Figure 57 NTP Window; Table 49 NTP Parameters

Configure a G-240W-J indoor ONT 7368 ISAM ONT G-240W-J Product Guide
138 3FE-48009-AAAA-TCZZA Issue: 01
4 STOP. This procedure is complete.
Procedure 38 NTP configuration
1 Select Application > NTP from the top-level menu in the GPON Home Gateway window, as
shown in Figure 57.
Figure 57 NTP window
Table 49 describes the fields in the NTP window.
Table 49 NTP parameters
Field
Description
Enable NTP Service
Select this checkbox to enable NTP service
Current Time
Enter the current local date and time
Primary Time Server
Choose a time server from the drop-down menu or choose Customer setting and
enter the address of the time server.
Secondary Time Server
Choose a time server from the drop-down menu or choose Customer setting and
enter the address of the time server.
(1 of 2)