This service depends on your network operator and is only available for
subscribed contacts. To subscribe a contact, select Options > Subscribe
contact, or if one or more contacts are already marked, Subscribe marked.
Make a channel call
To make a call to a channel, select Channel list in the PTT menu, scroll to the
desired channel, and press and hold the PTT (volume up) key.
Make a one-to-one call
To start a one-to-one call, select Menu > Contacts > Names, or Menu >
Push to talk > Callback inbox, Channel list, or Contacts list. Select a contact,
a member, or a nickname, and press and hold the PTT (volume up) key.
Make a PTT call to multiple recipients
You can select multiple PTT contacts from the contact list.
1. Select Menu > Push to talk > Contacts list, and mark the desired contacts.
2. Press and hold the PTT (volume up) key to start the call. The participating
contacts are shown on the display as soon as they join the call.
3. Press and hold the PTT (volume up) key to talk to them. Release the PTT
(volume up) key to hear the response.
4. Press the end key to terminate the call.
Receive a PTT call
A short tone notifies you of an incoming PTT call, which you can accept or reject.
When you press and hold the PTT (volume up) key while the caller is talking,
you hear a queuing tone, and Queuing is displayed. Wait for the other person
to finish; then you can talk immediately.
Push to talk
72
Cyan
Magenta
Yellow
Black
file:/D:/temp/overmode/GUID-431D2638-1BD0-45C5-83AF-C38B84F5117C.20070514145238033.en1179145165145/en/1/
GUID-0114949A-2FD0-4027-894A-63EEE9257447.xml Page 72 May 14, 2007 3:20:53 PM
To Next Page
Loading...
