Basic System Configuration Guide System Management
Edition: 01 3HE 11010 AAAC TQZZA 343
If the first sample is greater than or equal to the rising threshold value and startup-
alarm is equal to rising or either, a single rising threshold crossing event is
generated.
If the first sample is less than or equal to the falling threshold value and startup-
alarm is equal to falling or either, a single falling threshold crossing event is
generated.
Values rising, falling, either
Default either
Configuration example:
memory-use-alarm rising-threshold 50000000 falling-threshold 45999999 interval 500
rmon-event-type both start-alarm either
memory-use-warn
Syntax memory-use-warn rising-threshold threshold [falling-threshold threshold] interval
seconds [rmon-event-type] [startup-alarm alarm-type]
no memory-use-warn
Context config>system>thresholds
Description The memory thresholds are based on monitoring the TIMETRA-SYSTEM-MIB
sgiMemoryUsed object. This object contains the amount of memory currently used by the
system. The severity level is Warning.
The absolute sample type method is used.
The no form of this command removes the configured compact flash threshold warning.
Parameters rising-threshold threshold — specifies a threshold for the sampled statistic. When the
current sampled value is greater than or equal to this threshold, and the value at the
last sampling interval was less than this threshold, a single threshold crossing event
will be generated. A single threshold crossing event will also be generated if the first
sample taken is greater than or equal to this threshold and the associated startup-
alarm is equal to rising or either.
After a rising threshold crossing event is generated, another such event will not be
generated until the sampled value falls below this threshold and reaches less than or
equal to the falling-threshold value.
The threshold values are in bytes.
Values -2147483648 to 2147483647
Default 0
To Next Page
Loading...
