System Management
352
Basic System Configuration Guide
3HE 11010 AAAC TQZZA Edition: 01
If the time zone configured is listed in Table 23, then the starting and ending parameters and
offset do not need to be configured with this command unless it is necessary to override the
system defaults. The command returns an error if the start and ending dates and times are
not available either in Table 23 or entered as optional parameters in this command.
Up to five summer time zones may be configured; for example, for five successive years or
for five different time zones. Configuring a sixth entry will return an error message. If no
summer (daylight savings) time is supplied, it is assumed no summer time adjustment is
required.
The no form of the command removes a configured summer (daylight savings) time entry.
Default n/a — no summer time is configured
Parameters std-zone-name — the standard time zone name. The standard name must be a system-
defined zone in Table 23. For zone names in the table that have an implicit summer
time setting, for example MDT for Mountain Daylight Saving Time, the remaining
start-date, end-date and offset parameters need to be provided unless it is necessary
to override the system defaults for the time zone.
Values std-zone-name ADT, AKDT, CDT, CEST, EDT, EEST, MDT, PDT,
WEST
non-std-zone-name — the non-standard time zone name. Create a user-defined name
using the zone command.
Values 5 characters maximum
end
Syntax end end-week end-day end-month hours-minutes
Context config>system>time>dst-zone
Description This command configures the end of summer time settings.
Parameters end-week — specifies the starting week of the month when the summer time will end
Values first, second, third, fourth, last
Default first
end-day — specifies the starting day of the week when the summer time will end
Values sunday, monday, tuesday, wednesday, thursday, friday, saturday
Default sunday
end-month — specifies the starting month of the year when the summer time will end
Values january, february, march, april, may, june, july, august, september,
october, november, december}
Default january
To Next Page
Loading...
