Basic System Configuration Guide System Management
Edition: 01 3HE 11010 AAAC TQZZA 435
Reference ID When stratum is between 0 and 15, this field shows the IP
address of the remote NTP server or peer with which the remote
is exchanging NTP packets. For reference clocks, this field shows
the identification assigned to the clock, such as, “.GPS.” For an
NTP server or peer, if the client has not yet synchronized to a
server/peer, the status cannot be determined and displays the
following codes:
Peer Codes:
ACST — the association belongs to any cast server
AUTH — server authentication failed. Please wait while the
association is restarted.
AUTO — autokey sequence failed. Please wait while the
association is restarted.
BCST — the association belongs to a broadcast server
CRPT — cryptographic authentication or identification failed. The
details should be in the system log file or the cryptostats statistics
file, if configured. No further messages will be sent to the server.
DENY — access denied by remote server. No further messages
will be sent to the server.
DROP — lost peer in symmetric mode. Please wait while the
association is restarted.
RSTR — access denied due to local policy. No further messages
will be sent to the server.
INIT — the association has not yet synchronized for the first time
MCST — the association belongs to a manycast server
NKEY — no key found. Either the key was never installed or is not
trusted.
RATE — rate exceeded. The server has temporarily denied
access because the client exceeded the rate threshold.
RMOT — the association from a remote host running ntpdc has
had unauthorized attempted access
STEP — a step change in system time has occurred, but the
association has not yet resynchronized system codes
Reference ID
(continued)
INIT — the system clock has not yet synchronized for the first
time
STEP — a step change in system time has occurred, but the
system clock has not yet resynchronized
Auth Authentication
Poll Polling interval in seconds
Table 43 Show System NTP Output Fields (Continued)
Label Description
To Next Page
Loading...
