Basic System Configuration Guide System Management
Edition: 01 3HE 11010 AAAC TQZZA 445
Table 47 Show System PTP Clock Output Fields
Label Description
Local Clock
Clock Type The local clock type
Admin State up — the local clock is enabled and running
down — the local clock is shut down and not running
Source I/F The PTP clock source interface as configured by the source-
interface command
Clock MDA The PTP clock-mda as configured by the clock-mda command
PTP Profile The PTP profile as configured by the profile command
Dynamic Peers Indicates whether dynamic peers are enabled
Admin Freq-source The administrative value of the frequency source
Oper Freq-source The operational value of the frequency source
Clock ID The local clock identification
Clock Class The local clock class
Clock Accuracy The local clock accuracy designation
Clock Variance The local clock variance
Clock Priority1 The local clock priority1 designation
Clock Priority2 The local clock priority2 designation
Domain The local clock domain
Two-Step Indicates whether the local clock uses a one-step or two-step
synchronization method
Use Node Time Indicates whether the PTP clock uses the node system time as
the clock source
Tx While Sync
Uncert*
Indicates whether Announce messages are transmitted while the
clock is in a synchronization uncertain state: true or false
Sync Certainty State Indicates the synchronization certainty state of the local clock:
certain or uncertain
Parent Clock
Parent Clock ID The parent clock identification
Parent Port Number The parent clock port number
To Next Page
Loading...
