Quality of Service Guide Service Egress and Ingress QoS Policies
Edition: 01 3HE 11014 AAAC TQZZA 301
6.4.2.1.5 MC-MLPPP Forwarding Class Commands
dscp
Syntax dscp dscp-name
no dscp
Context config>qos>mc-mlppp>sap-egress>fc
Description This command defines the DSCP name for the forwarding class.
Default n/a
Parameters dscp-name — a system-defined, case-sensitive name
Values any name listed in Table 46
queue
Syntax queue queue-id
no queue
Context config>qos>mc-mlppp>sap-egress>fc
Description This command specifies the MC-MLPPP egress queue to which the traffic associated with
the forwarding class is to be forwarded. The command overrides the default queue mapping
for fc fc-name. The specified queue-id must exist within the policy before the mapping can be
made. Once the forwarding class mapping is executed, all traffic classified to the fc-name on
a SAP using this policy will use the indicated queue.
The no form of the command sets the queue-id back to the default queue for the forwarding
class (queue 1).
Default queue 1
Parameters queue-id — the MC-MLPPP SAP egress queue-id to be associated with the forwarding
class. The queue-id must be an existing queue defined in sap-egress policy-id.
Values 1 to 8
Default 1
To Next Page
Loading...
