Nokia 7705 - 8.2.3 Default ATM Traffic Descriptor Profile Policy Values

ATM QoS Traffic Descriptor Profiles
386
Quality of Service Guide
3HE 11014 AAAC TQZZA Edition: 01
traffic-desc traffic-desc-profile-id
8.2.3 Default ATM Traffic Descriptor Profile Policy Values
The default ATM QoS traffic descriptor profile is 1. The default profile cannot be
edited or deleted.
Table 53 below shows the ATM TD profile defaults.
The following output displays the default configuration:
A:ALU-1>config>qos# info detail
--------------------------------------------------
Echo "QoS Policy Configuration"
--------------------------------------------------
atm-td-profile 1 create
description "Default Traffic Descriptor"
service-category ubr
no traffic
no policing
descriptor-type P0_1
no shaping
exit
...
Table 53 ATM-TD-Profile Defaults
Field Default
atm-td-profile traffic-desc-profile-id 1
description Default Traffic Descriptor
descriptor-type Based on service category:
CBR: P0_1
UBR: P0_1
UBR+MIR: P0_1
rt-VBR or nrt-VBR: P0_1 and S0 _ 1
policing No policing
service-category UBR
traffic No traffic
shaping No shaping