Nokia 7705 - Page 114

Security
114
System Management Guide
3HE 11018 AAAC TQZZA Edition: 01
renum
Syntax renum old-entry-id new-entry-id
Context config>system>security>cpm-filter>ip-filter
config>system>security>cpm-filter>ipv6-filter
Description This command renumbers existing IP filter entries in order to resequence filter entries.
Resequencing may be required in some cases because the process is exited when the first
match is found and the actions are executed according to the accompanying action
command. This requires that entries be sequenced correctly from most to least explicit.
Parameters old-entry-id — the entry number of an existing entry
Values 1 to 64
where: 1 to 29 are filter entries
30 to 64 are extended filter entries
new-entry-id — the new entry number to be assigned to the old entry
Values 1 to 64
where: 1 to 29 are filter entries
30 to 64 are extended filter entries