System Management Guide Security
Edition: 01 3HE 11018 AAAC TQZZA 129
cannot-change-password
Syntax [no] cannot-change-password
Context config>system>security>user>console
Description This command allows a user to change their password for both FTP and console login.
To disable a user’s privilege to change their password, use the cannot-change-password
form of the command.
The cannot-change-password flag is not replicated when a user copy is performed. A
new-password-at-login flag is created instead.
Default no cannot-change-password
login-exec
Syntax [no] login-exec url-prefix:source-url
Context config>system>security>user>console
config>system>security>user-template>console
Description This command configures a user’s login exec file, which executes whenever the user
successfully logs in to a console session.
Only one exec file can be configured. If multiple login-exec commands are entered for the
same user, each subsequent entry overwrites the previous entry.
The no form of the command disables the login exec file for the user.
Default no login exec file is defined
Parameters url-prefix: source-url — enter either a local or remote URL, up to 200 characters in length,
that identifies the exec file that will be executed after the user successfully logs in
member
Syntax member user-profile-name [user-profile-name…]
no member user-profile-name
Context config>system>security>user>console
Description This command allows the user access to a profile.
A user can participate in up to eight profiles.
The no form of this command deletes access user access to a profile.
To Next Page
Loading...
