Security
140
System Management Guide
3HE 11018 AAAC TQZZA Edition: 01
3.10.2.1.10 TACACS+ Client Commands
tacplus
Syntax [no] tacplus
Context config>system>security
Description This command enables the context to configure TACACS+ authentication on the 7705 SAR.
For redundancy, multiple server addresses can be configured for each 7705 SAR.
The no form of the command removes the TACACS+ configuration.
accounting
Syntax accounting [record-type {start-stop | stop-only}]
no accounting
Context config>system>security>tacplus
Description This command enables TACACS+ accounting and configures the type of accounting record
packet that is to be sent to the TACACS+ server. The record-type parameter indicates
whether TACACS+ accounting start and stop packets will be sent or just stop packets will be
sent.
Default record-type stop-only
Parameters record-type start-stop — specifies that a TACACS+ start packet is sent whenever the
user executes a command and a stop packet is sent when the command is complete
record-type stop-only — specifies that a stop packet is sent when the command
execution is complete
authorization
Syntax [no] authorization
Context config>system>security>tacplus
Description This command configures TACACS+ authorization parameters for the system.
Default no authorization
To Next Page
Loading...
