Nokia 7705 - 3.23.3 Configuring Path Computation and Control for SR-TE LSPs

Security
150
System Management Guide
3HE 11018 AAAC TQZZA Edition: 01
Parameters version — the protocol version for the list of allowed ciphers on the SSH server
Values 1 — SSH protocol version 1 (not supported on a 7705 SAR node
running in FIPS-140-2 mode)
2 — SSH protocol version 2
server-shutdown
Syntax [no] server-shutdown
Context config>system>security>ssh
Description This command enables the SSH servers running on the system.
Default at system startup, only the SSH server is enabled
version
Syntax version ssh-version
no version
Context config>system>security>ssh
Description This command specifies the SSH protocol version that will be supported by the SSH server.
The server may be configured as Secure Shell Version 1 (SSH1), Version 2 (SSH2) or both.
SSH1 and SSH2 are different protocols and encrypt at different parts of the packets. SSH1
uses the server as well as host keys to authenticate systems, whereas SSH2 only uses host
keys. SSH2 does not use the same networking implementation that SSH1 does and is
considered a more secure, efficient, and portable version of SSH.
Parameters ssh-version — specifies the SSH version
Values 1 — specifies that the SSH server will only accept connections from
clients supporting SSH protocol version 1
2 — specifies that the SSH server will only accept connections from
clients supporting SSH protocol version 2
1-2 — specifies that the SSH server will accept connections from
clients supporting either SSH protocol version 1, or SSH protocol
version 2, or both
Default 2