System Management Guide Security
Edition: 01 3HE 11018 AAAC TQZZA 179
source-address
Syntax source-address
Context show>system>security
Description This command displays the source address configured for applications.
Output The following output is an example of source address information, and Table 18 describes
the fields.
Output Example
A:ALU-1# show system security source-address
===============================================================================
Source-Address applications
===============================================================================
Application IP address/Interface Name Oper status
-------------------------------------------------------------------------------
telnet 10.20.1.7 Up
radius loopback1 Up
===============================================================================
A:ALU-1#
Def. action Permit all: Permits access to all commands
Deny: Denies access to all commands
None: No action is taken
Entry The entry ID in a policy or filter table
Description Displays the text string describing the entry
Match Command Displays the command or subtree commands in subordinate
command levels
Action Permit all: Commands matching the entry command match
criteria are permitted
Deny: Commands not matching the entry command match
criteria are not permitted
No. of profiles The total number of profiles listed
Table 17 Show User Profile Output Fields (Continued)
Label Description
To Next Page
Loading...
