System Management Guide SNMP
Edition: 01 3HE 11018 AAAC TQZZA 221
4.8.2.2 Show Commands
counters
Syntax counters
Context show>snmp
Description This command displays SNMP counter information. SNMP counters will continue to increase
even when SNMP is shut down. Some internal modules communicate using SNMP packets.
Output The following output is an example of SNMP counters information, and Table 23 describes
the fields.
Output Example
A:ALU-1# show snmp counters
==============================================================================
SNMP counters:
==============================================================================
in packets : 463
------------------------------------------------------------------------------
in gets : 93
in getnexts : 0
in sets : 370
out packets: 463
------------------------------------------------------------------------------
out get responses : 463
out traps : 0
variables requested: 33
variables set : 497
==============================================================================
A:ALU-1#
Note: The following command outputs are examples only; actual displays may differ
depending on supported functionality and user configuration.
Table 23 Show SNMP Counters Output Fields
Label Description
in packets The total number of messages delivered to SNMP from the
transport service
in gets The number of SNMP get request PDUs accepted and
processed by SNMP
in getnexts The number of SNMP get next PDUs accepted and processed by
SNMP
To Next Page
Loading...
