System Management Guide Event and Accounting Logs
Edition: 01 3HE 11018 AAAC TQZZA 311
event-id — the event ID, expressed as a decimal integer
Values 1 to 4294967295
router
Syntax router {eq | neq} router-instance [regexp]
no router
Context config>log>filter>entry>match
Description This command specifies the log event matches for the router.
Parameters eq — determines if the matching criteria should be equal to the specified value
neq — determines if the matching criteria should not be equal to the specified value
router-instance — specifies a router name up to 32 characters to be used in the match
criteria
regexp — specifies the type of string comparison to use to determine if the log event
matches the value of router command parameters. When the regexp keyword is
specified, the string in the router command is a regular expression string that will be
matched against the router string in the log event being filtered.
When the regexp keyword is not specified, the router command string is matched
exactly by the event filter.
severity
Syntax severity {eq | neq | lt | lte | gt | gte} severity-level
no severity
Context config>log>filter>entry>match
Description This command adds an event severity level as a match criterion.
Only one severity command can be entered per event filter entry. When multiple severity
commands are entered, the last command overwrites the previous command.
lt Less than
lte Less than or equal to
gt Greater than
gte Greater than or equal to
Table 37 Valid Match Operators for Event Numbers (Continued)
Operator Notes
To Next Page
Loading...
