System Management Guide Event and Accounting Logs
Edition: 01 3HE 11018 AAAC TQZZA 313
The subject is the entity for which the event is reported, such as a port. In this case, the port-
id string would be the subject.
Only one subject command can be entered per event filter entry. If multiple subject
commands are entered, the last command overwrites the previous command.
The no form of the command removes the subject match criterion.
Default no subject
Parameters eq | neq — this operator specifies the type of match. Valid operators are listed in
Table 40.
subject — a string used as the subject match criterion
regexp — specifies the type of string comparison to use to determine if the log event
matches the value of subject command parameters. When the regexp keyword is
specified, the string in the subject command is a regular expression string that will
be matched against the subject string in the log event being filtered.
When the regexp keyword is not specified, the subject command string is matched
exactly by the event filter.
Table 40 Valid Operators for Event Subjects
Operator Notes
eq Equal to
neq Not equal to
To Next Page
Loading...
