System Management Guide Event and Accounting Logs
Edition: 01 3HE 11018 AAAC TQZZA 343
If the to-seq number is not provided, the log contents to the end of the log are
displayed unless the count parameter is present, in which case the number of entries
displayed is limited by the count.
Values 1 to 4294967295
Default all sequence numbers
count — limits the number of log entries displayed to the number specified
Values 1 to 4294967295
Default all log entries
router-instance — specifies a router name up to 32 characters to be used in the display
criteria
expression — specifies to use a regular expression as match criteria for the router
instance string
subject — displays only log entries matching the specified text subject string. The subject
is the object affected by the event; for example, the port-id would be the subject for
a link-up or link-down event.
regexp — specifies to use a regular expression as parameters with the specified subject
string
ascending | descending — specifies the log sort direction. Logs are normally shown
from the newest entry to the oldest in descending sequence number order on the
screen. When using the ascending parameter, the log will be shown from the oldest
to the newest entry.
Default Descending
Output The following output is an example of event log summary information, and Table 49 describes
the fields.
Output Example
A:ALU-1# show log log-id
=====================================================================
Event Logs
=====================================================================
Log Source Filter Admin Oper Logged Dropped Dest Dest Size
Id Id State State Type Id
--------------------------------------------------------------------
1 none none up down 52 0 file 10 N/A
2 C none up up 41 0 syslog 1 N/A
99 M none up up 2135 0 memory 500
=====================================================================
A:ALU-1#
To Next Page
Loading...
