8/8
3. Select Communicator in Memory in use and then press Move.
Note: If you cannot select Move, this means that you already have an old
message storage on your communicator, which you should delete first. To do this
Select Communicator in Memory in use and press Delete. Now, it is possible
move the new Message storage to the comminicator.
Warning: If you delete the Message storage you should be sure that you delete
the right one, as this function deletes all messages in the Message storage and
this operation is irreversible.
Remove source memory card and insert destination memory card to destination
Communicator.
Copyright
Nokia 2002. All rights reserved | ver. 1.0
To Previous Page
Loading...
