Nokia A032 Manual

Access point parameters
11
zone_privacy Advanced
Access
Point
“off” “on” or “off” If set to “on”, the AP
blocks traffic from
being passed directly
between radio clients
(this has the effect of
blocking peer-peer
networking)
snmp_contact SNMP “Contact” up to 32
characters
SNMP contact name
(from the RFC1213
MIB)
snmp_sys_name SNMP “Sys Name” up to 32
characters
SNMP system name
(from the RFC1213
MIB)
snmp_location SNMP “Location” up to 64
characters
SNMP location data
(from the RFC1213
MIB)
dhcp_mode DHCP “disabled” “off”,
“disabled”,
“client”,
“server”
Used to select DHCP
operation for the AP.
By default, this will
be disabled, but
server and client
operation can be
selected.
dhcp_base DHCP 192.168.5.100 IP address The base address of
the IP pool for DHCP
server operation.
dhcp_pool DHCP 16 1–64 The number of
entries in the pool for
the DHCP server.
dhcp_gateway DHCP none IP address The gateway address
for DHCP clients.
Name
(command line)
Config
Web page
Factory default Valid range Description

Nokia A032 Specifications

General

Brand	Nokia
Model	A032
Category	Wireless Access Point
Language	English