Radius operation
29
Because there are many different radius servers
available, no specific configuration details can
be given. However, the following general
procedure can be used:
1 Set the Radius secret and the password
common to all APs:
set shared_secret
<shared_secret> <password>
2 For each station, create an entry where the
username is the station MAC address
expressed as a 12-character hexadecimal
string, and the password is the password
used in step 1 of the AP configuration
3 If per-station WEP keys are required, define
the WEP key for the station. How this is
done will depend on how the server handles
vendor-specific attributes.
Because the use of a per-station WEP key is
optional, Radius can still be used to
authenticate wireless station access.
To Next Page
Loading...
