36
Nokia A032 Addendum
If a DHCP frame is received containing a file
reference, the AP will use TFTP to download
and store it. See page 42 for details of the TFTP
download, but note that, in this case, there is a
hierarchy of configuration data:
1 The standard DHCP options (IP address and
network parameters, including host (AP)
name) are fetched and applied.
2 TFTP is used to fetch the specified
configuration, which is itself applied, and
finally, the vendor options fields are parsed.
If any configuration details clash, the
following precedence applies:
• Vendor Options (highest)
• DHCP Options
• TFTP Download (existing stored settings)
If the AP is run in learn mode, the DHCP client
is automatically disabled.
To Next Page
Loading...
Need help?
General
