Nokia A032 Manual

8
Nokia A032 Addendum
beacon_interval n/a 100 1–65535 Beacon interval in
mS
dtim_interval n/a 5 1–255 Number of beacons
between DTIMs
tx_power n/a “high” “low”, “low1”,
“low2”, “high”
Access points
transmit power level.
By default, this is set
to maximum, but
may be reduced to
suit applications with
multiple APs.
cca_mode n/a “cs_only” “ed_only”,
“cs_only”,
“ed_and_cs”,
“ed_or_cs”
This setting
determines which
clear channel
assessment (CCA)
mode should be used.
ed_threshold n/a 17 10–127 Energy detection
threshold used in
CCA.
ed_absolute n/a TRUE TRUE or FALSE Use Absolute energy
detection threshold,
or relative to noise
floor
Name
(command line)
Config
Web page
Factory default Valid range Description

Nokia A032 Specifications

General

Brand	Nokia
Model	A032
Category	Wireless Access Point
Language	English