RM-781
Service Manual Level 1&2
Co nf id e nt ial | Co p y rig ht © 2011 Nokia | A ll rights reserved
13) Lift up the B2B FLEX SHI ELDI NG with the denta l
tool. Be careful not to damage yourself or any nearby
components with the sharp end of the dental tool.
14) Remove the B2B FLEX SHIELDING with tweezers.
15) Open the DISPLAY connector with the SRT-6. Be
careful not to damage the connector or any nearby
components.
16) Use the SS-93 to release the ENGINE BOARD from
the top side.
17) Lift up the ENGI NE BOARD from the top side and
remove it to direction shown.
18) Push the NUMERICAL KEYMAT out of the A-COVER
and remove it.
To Next Page
Loading...
