RM-781
Service Manual Level 1&2
Co nf id e nt ial | Co p y rig ht © 2011 Nokia | A ll rights reserved
31) Place the camera removal tool SS-276 on top of
the CAMERA MODULE and press down the button on
the SS-276 to release the CAMERA MODULE.
32) While holding down the button, lift up the SS-
276 and remove the CAMERA MODULE.
33) Release the CONNECTOR SUPPORT ASSEMBLY with
the SRT-6.
34) Remove the CONNECTOR SUPPORT ASSEMBLY with
tweezers.
35) Lever out the BT-FM SHIELDING LID with the
dental tool. Be careful not to damage any nearby
components.
36) Remove the BT-FM SHIELDING LID with tweezers.
Do not use it again. Discard it.