ENGLISH
To check the battery charge when the
headset is not connected to a charger,
press the power key. If the indicator
light is green, the charge level is
sufficient. If the light is yellow, you
may need to recharge the battery
soon. If the light is red, recharge the
battery.
When the battery charge is low, the
headset beeps every 5 minutes and
the red indicator light flashes.
Switch on or off
To switch on, press and hold the power
key for about 2 seconds. The headset
beeps, and the green indicator light is
displayed. The headset tries to
connect to a paired phone.
To switch off, press and hold the
power key for about 2 seconds when
the headset is on. The headset beeps,
and the red indicator light is briefly
displayed. If the headset is not
connected to a phone within about 30
minutes, it switches off automatically.
Pair and connect the headset
Before using the headset, you must
pair and connect it with a compatible
phone.
1. Ensure that your phone is on and
the headset is off.
2. Press and hold the power key
(for about 5 seconds) until the
green indicator light starts to flash
quickly.
3. Within about 3 minutes, activate
the Bluetooth feature on the
phone, and set it to search for
Bluetooth devices.
4. Select the headset from the list of
found devices.
5. If necessary, enter the passcode
0000 to pair and connect the
headset to your phone. In some
phones, you may need to make the
To Next Page
Loading...
Need help?
General
Weight and Dimensions
