© 2010 Nokia. All rights reserved. 5
2. If the headset has not been
previously paired with a device,
switch on the headset. The
headset enters pairing mode,
and the green indicator light
starts to flash quickly.
If the headset has been
previously paired with a device,
make sure the headset is
switched off, and press and
hold the multifunction key for
about 5 seconds until the green
indicator light starts to flash
quickly.
3. Within about 3 minutes,
activate the Bluetooth feature
on your device, and set it to
search for Bluetooth devices.
For details, see the user guide
of your mobile device.
4. Select the headset from the list
of found devices.
5. Enter the passcode 0000 to
pair and connect the headset to
your device. In some devices,
you may need to make the
connection separately after
pairing.
When the headset is connected to
your device and is ready for use,
the green indicator light flashes
slowly.
To manually connect the headset
to the last used device, press and
hold the multifunction key for
about 2 seconds, or make the
connection in the Bluetooth menu
of your device.
You may be able to set your device
so that the headset connects to it
automatically. To activate this
feature in a Nokia device, modify
the paired device settings in the
Bluetooth menu.
To Next Page
Loading...
