Change the volume
Set the desired volume level on your connected mobile device. The selected volume level
is saved as the minimum volume level for the device that is currently connected to the
headset.
Pair and connect the headset to two phones
When you use the headset for the first time, it automatically connects to your phone.
You can also connect your headset to another phone, and manage calls from, for
example, both your personal and your work phone at the same time.
1 Make sure Bluetooth is activated on both phones.
2 To switch the headset off, press and hold
for 2 seconds.
3 To activate pairing mode, press and hold
for 5 seconds, and pair the headset
with the second phone.
4 Switch the headset off and back on. The headset connects to both phones.
To use your headset with just one phone again, activate pairing mode, and press and
hold
and for 5 seconds.
Handle calls from two phones
If your headset is connected to two phones, you can handle calls from both at the same
time.
End an ongoing call, and answer a call on another phone
Press
.
Put an ongoing call on hold, and answer a call on another phone
Press and hold
for 2 seconds.
Switch between active and held calls
Press and hold
for 2 seconds.
End an ongoing call, and activate a held call
Press
.
If you redial or use voice dialling, the call is made on the phone you last had an active
call on with the headset.
Settings
Clear device pairings
1 To switch the headset off, press and hold
for 2 seconds.
7
To Next Page
Loading...
Need help?
General
