4
Using your earbuds
Touch control:
1.
c. Reset to the original settings:
Put the earbuds back in the charging case (the LEDs will turn red) > Touch the
touchpad of two earbuds for 5 seconds until the LEDs flash blue and red
alternately for 3 times indicating that the reset is successful.
b. Use single earbud:
You can single use the right earbud. If the earbuds have been paired with
your Bluetooth device before, the right earbud will automatically connect
with your device when taken out of the charging case.
Additional controls:
a. Manually power on and off:
2.
Touch the touchpad of two earbuds for 3 seconds to manually power on;
touch the touchpad of one earbud for 5 seconds to manually power off.
Volume up
Activate voice commands
Play / Pause music
Answer / End calls
Reject calls
2 secs
1 sec
x 1
x 1
x 2
Volume down
x 2
x 3
Previous track
x 3
Next track
L
R
To Next Page
Loading...
