Handle calls from two devices
End an ongoing call, and answer a call on
another device — Touch
.
Put an ongoing call on hold, and answer
a call on another device — Touch and hold
for 2 seconds.
Switch between active and held calls —
Touch and hold
for 2 seconds.
End an ongoing call, and activate a held
call — Touch
.
If you redial or use voice dialling, the call is
made on the device you last had an active call
on with the headset.
Settings
Deactivate voice prompts
Make sure the headset is switched on, and
touch and hold
for 9 seconds. You hear a
voice prompt, and a yellow indicator light
flashes once.
Activate voice prompts — Touch and hold
for 9 seconds. You hear a voice prompt,
and a green indicator light flashes once.
ENGLISH
Cyan
Magenta
Yellow
Black
To Next Page
Loading...
