17
Removing the card
You should always stop the wireless LAN card before removing it from the PC
card slot of your computer.
Caution: In Windows NT 4.0, by default, you should not remove the wireless
LAN card without switching off the computer first.
To stop the card:
1 Click Start. Select Settings and Control Panel. Double-click the PC Card icon to
open the PC Card Properties dialog box.
2 Select Nokia C110/C111 Wireless LAN Card from the list and click Stop.
3 When the operating system prompts you, remove the wireless LAN card.
4 Click OK to exit the PC Card Properties dialog box.
Tip: A quicker way to stop the wireless LAN card is to click the PC Card icon
on the taskbar and to select the option Stop Nokia C110/C111 Wireless
LAN Card. Again, wait until the operating system prompts you to remove
the card.
Caution: Closing the Monitor or the Manager window does not quit the
program. To quit the program, you must stop the wireless LAN card.
Caution: The Windows 98 operating system stops all PC cards when a new PC
card is inserted into the computer. If you insert another PC card into your
computer, make sure that you first stop the Nokia C110/C111 and remove it
from the PC card slot.
Uninstalling the Nokia C110/C111
Caution: Before you start uninstalling the Nokia C110/C111, you must first
stop the wireless LAN card and then remove it from the PC card slot of the
computer. See “Removing the card” for more information.
Note: Network profiles will remain unchanged even if you uninstall the
Nokia C110/C111 software and then reinstall it.
Windows 95, 98, Me, 2000
1 Click Start, select Programs and Nokia C110. Click Uninstall Nokia C110.
2 A dialog box asks you to confirm whether you want to remove the program.
Click OK.
3 The uninstallation starts. A dialog box informs you when the uninstallation is
completed. Click Finish.