1. Insert the SIM and memory
card
1. Open the SIM card tray: push the tray opener pin
in the tray hole and slide the tray out.
2. Put the nano-SIM in the SIM slot on the tray with
the contact area face down.
3. If you have a memory card, put it in the memory
card slot.
4. Slide the tray back in.
Use only original nano-SIM cards. Use of
incompatible SIM cards may damage the card or the
device, and may corrupt data stored on the card.
Use only compatible memory cards approved for
use with this device. Incompatible cards may
damage the card and the device and corrupt data
stored on the card.
Important: Do not remove the memory card
when an app is using it. Doing so may damage the
memory card and the device and corrupt data
stored on the card.
2. Charge the battery and switch
the phone on
Plug a compatible charger into a wall outlet, and
connect the cable to your phone. Your phone
supports the USB-C cable. You can also charge your
phone from a computer with a USB cable, but it may
take a longer time.
If the battery is completely discharged, it may take
several minutes before the charging indicator is
displayed.
To switch your phone on, press and hold the power
key until the phone vibrates. The phone guides you
through the setup.
For an online user guide with
safety and legal information, and
troubleshooting help, go to
www.nokia.com/mobile-
support.
Get Started
Nokia C300
TA-1515 EN
7. Headset connector
8. Front camera
9. Earpiece
10. Volume keys
11. Power/Lock key/Fingerprint sensor
12. USB connector
1. Microphone
2. Loudspeaker
3. Camera
4. Flash
5. SIM and memory card slot
6. Microphone
6
7
2
1
4
5
3
12
89
10
11
To Next Page
