Operation
13
1. Ensure that the car kit is switched on and connected to your mobile
phone.
2. Press and hold the Navi wheel for over 5 seconds when no call is in
progress. The car kit plays the name of the currently selected
language.
To stop the language selection without changing the language, press
and hold the Navi wheel for about 2 seconds, or do not turn the Navi
wheel within 10 seconds.
3. To scroll to the desired language, turn the Navi wheel.
To turn voice prompts off, scroll to the end of the language list. The
related voice prompt is played in the currently selected language.
4. To save the language setting, press the Navi wheel within 10
seconds.
■ Reset
To reset the car kit if it stops functioning during a call or voice dialling,
press and hold the Navi wheel for over 5 seconds. The car kit plays a
short beep. The reset does not clear the pairing settings.
To Next Page
Loading...
