EasyManua.ls Logo

Nokia FastMile 3.1 5G12-13W-B - Page 18

Nokia FastMile 3.1 5G12-13W-B
91 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Setting up the FastMile 5G Gateway 3.1
18
User Guide
© 2022 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
3TG-02290-AAAA-TCZZA-02
One or more LEDs on the top of the gateway will turn on soon.
There are 5 LEDs:
status LED -in the middle of the circle
5G LED - above the status LED
signal strength LEDs (3) - above the 5G LED
The FastMile 5G Gateway 3.1 starts searching for the best 5G connectivity. The
status LED and the 5G LED start to blink and all signal LEDs are solid ON to indicate
that the device is booting up.
When the signal strength LEDs go off, the booting-up phase is completed and the
status LED is lit RED to indicate the signal search procedure.
Wait until the status LED is green. This indicates connectivity to 5G or 4G network.
Figure 8 Location of status LEDs
For more information about the LEDs, refer to the Understanding the LED colors
section.
Note: The signal search may take a few minutes.

Table of Contents

Related product manuals