User Guide Setting up the FastMile 5G Gateway 3.1
3TG-02290-AAAA-TCZZA-02 © 2022 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
19
Managing the FastMile 5G Gateway 3.1 with the
Wi-Fi Mobile App
To manage the FastMile 5G Gateway 3.1, use either the WebUI or the Wi-Fi Mobile
App. The Wi-Fi Mobile App provides information that can help with installation, and
provides guidance for tasks such as how to configure Wi-Fi settings and how to add
Wi-Fi Beacon 2 devices to the Wi-Fi network. The Wi-Fi Mobile App can be
downloaded from Google Play or the Apple App store.
Download the app to your phone or tablet to create an account.
Use the in-app QR code scanner to read the QR code that's located on the bottom
of the FastMile 5G Gateway 3.1.
The FastMile 5G Gateway 3.1 pairs with your phone and performs initial
configurations.
Note: You may need to repeat this cycle several times before finding the ideal location for
the FastMile 5G Gateway 3.1.
Once you find a good signal, do not reposition the device. If the position changes, you may
need to verify the signal strength again.
The LED on/off settings may prevent signal LEDs to be shown; this can be changed from
the WebUI (LED management) or by using the signal test button.
To Next Page
Loading...
