Troubleshooting
76
User Guide
© 2022 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
3TG-02290-AAAA-TCZZA-02
Signal strength LED
There are three LEDs to indicate signal strength. These signal LEDs blink during
start-up and at the start of a signal test.
See Understanding the LED colors for a description of the signal strength LED. The
number of lit LEDs indicate the signal strength. For example, three means a very
strong signal.
Using the signal test button
You can check and test the signal strength at any time by pressing the signal test
button on the side of the FastMile 5G Gateway 3.1 to check the LEDs and perform
corrective actions.
Figure 58 Location of signal test button
To Next Page
Loading...
