EasyManua.ls Logo

Nokia FastMile 3 5G12-13W-A - IMEI (International Mobile Equipment Identity); Cellular Network; Ethernet

Nokia FastMile 3 5G12-13W-A
89 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
User Guide for Oceania WebUI hierarchy screens
3TG-02288-AAAA-TCZZA-02 © 2022 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
43
IMEI (International Mobile Equipment Identity)
IMEI information represents an identifier for each mobile device.
Cellular network
Under the Status / General page, there is the Cellular Network Card which has the
following information:
access point details include all APNs
download and upload totals
For each APN, there is a dot to show connection status, as follows:
green: connected
gray: not connected
Ethernet
The Ethernet information status indicates whether a device is connected to the
Ethernet connection:
green: there is an Ethernet connection
gray: there is no Ethernet connection
You may view the following Ethernet connectivity information:
IP address: local address
subnet mask: default subnet mask
Note: For uSIM cards, when status shows 'Available' it means PIN number verification is
needed. When status shows 'Blocked' it means the SIM PIN is locked and you need to input
a PUK number and a new PIN number. When status shows 'Error' it means the SIM card is
destroyed because of a PUK error, or a modem failure, or a broken SIM card, or a specific
PIN lock acceptance feature is not active but the SIM card PIN number is locked.
After another SIM card B with PIN enabled is inserted to the CPE and its PIN is verified, the
SIM card A PIN number will be needed when it is inserted.

Table of Contents

Related product manuals