User Guide Installing the FastMile 5G Receiver
3TG-02285-AAAA-TCZZA-02 © 2022 Nokia. Nokia Confidential Information
Use subject to agreed restrictions on disclosure and use.
21
Figure 13 Recommended location on a window with a side hinge
Please note the following mounting conditions information when mounting the
FastMile 5G Receiver on the outside of a window:
• As stated in the product documentation, the FastMile 5G Receiver (specifically,
the combination of the device, mounting sleeve, and adhesive strips) can
withstand temperatures ranging from -40°C to +55°C. The product is compliant
to Ingress Protection IP66 rating for Outdoor mount.
• The mounting sleeve and adhesive strips can be mounted in temperatures
ranging from -40°C to +55°C. The most optimized result can be obtained
between +20°C to +38°C.
• The mounting of the device with the adhesive strips works best on a very flat,
clean and dry surface (no ice, free of grease, no dust, no loose particles, no oil,
no separating agents)
• Avoid air bubbles by applying enough pressure for at least 30 seconds
• The allowed adhesive strip temperature ranges from approximately -50°C to
+150°C. This covers the allowed FastMile 5G Receiver temperature range; as
well, the adhesive strips are capable of withstanding the effects of increased
glass temperature due to sun load conditions and heat dissipation from the
device (tested according to ETSI EN 300 019-2-4 V2.4.1 Class 4.1E)
• If otherwise not feasible to mount on a dry and clean flat surface, please
consider preparing the surface accordingly or mount the device on the window
indoors or whenever ambient temperatures are more favorable
To Next Page
Loading...
