Table 7-42 RG Troubleshooting Counters parameters (continued)
Field Description
Latency This test is used to determine the lowest round-trip time in milliseconds by pinging the target
server multiple times.
Click Latency Test to specify the time for the test.
The default is weekly, performed at idle to a public server.
DNS Response Time This test is used to determine the lowest round-trip time in milliseconds by sending a request to
the target DNS server.
Click DNS Response Test to specify the time for the test.
The default is weekly, performed at idle to a public server.
3
Click Refresh to display up-to-date information.
END OF STEPS
Configure a G-2425G-B indoor ONT
RG Troubleshooting Counters
Viewing Residential Gateway (RG) troubleshooting counters
7368 ISAM ONT
Draft Draft
August 2020
Issue 4 155
Nokia – Proprietary and Confidential
Use pursuant to applicable agreements
3FE-48293-ACAA-TCZZA
To Next Page
Loading...
