Copyright © 2004 Nokia. All rights reserved.
34
3. To switch between the two calls: Press (Options), scroll to Swap, press
(Select).
4. To end the active call: Press (Options), scroll to End active call, press
(Select). The held call becomes active.
To end both calls: Press (Options), scroll to End all calls, press
(Select).
■ Answering a call
When somebody is calling you, the phone rings (if the Incoming call alert setting is
not set to Off) and flashes its lights, and a related text is displayed.
If the network could not identify the caller, Call is displayed.
If the caller could be identified, the caller's phone number (or name if stored in the
Phone book) and calling are displayed.
1. To answer the call, press (Answer).
If the call was diverted from some other phone number, the > sign may be
shown after Call or calling (network service).
2. Press (End) to finish the call.
Diverting or rejecting a call
If you do not want to answer the call, press . The caller will hear a “line busy”
tone. If the Divert when busy function is activated (see page 88), the call is
diverted e.g. to your voice mailbox.
To Next Page
Loading...
