Easily lter events by pressing the blue button on your remote control, oering a variety of lter options to
quickly locate events of your preferred type. For more information about a highlighted event, press the yellow
button to display detailed information.
To view events from the previous or next day, simply press the red or green buttons respectively. These
functions are assigned to the colored buttons on your remote control if available. Refer to the on-screen
instructions for the specic functions of each button.
Please note that the guide will not be accessible if the TV input source is locked. You can lock/unlock the input
source by going to Settings > Channel > Parental Controls > Locked Inputs either in Live TV mode or on the
home screen.
11.1.2. Channel
Select the Live TV signal reception type to which your TV is connected to.
11.1.3. Channel management
To edit channel list, rst make sure LCN function is disabled in the channel settings menu. This can be done in
the Channel menu along with other channel management options.
• Open LiveTV app.
• Press OK to open the Channel list.
• Press the red button to open the Channel management.
Follow the following steps to edit the channels:
Channel SKIP
Once a channel is set to be skipped, it will no longer appear in the channel list or program guide, even after
restarting the TV, but the channel is not deleted.
• Select Channel Skip.
• Select the channels which you want to SKIP.
Channel SWAP
Switch the position of channels in the channel list.
• Select Channel Swap.
• Select the channel which you want to SWAP (for example, channel 1).
• Select the channel that you want to switch its position with (for example, channel 16).
• Conrm by pressing the OK button.
42
To Next Page
Loading...