Nokia HN24GE320C - Page 44

11.2.1 Source
Display the list of available input sources. Select the desired one and press OK to switch to that source.
11.2.2 Picture
Open the picture settings. How to adjust these settings, refer to 9.3.1.
11.2.3 Screen
Open the screen aspect ratio adjustments. Adjust these settings until you feel comfortable watching TV.
11.2.4 Sound
Open the sound settings. How to adjust these settings, refer to 9.3.2.
11.2.5 Power
Open the power and energy settings. How to adjust these settings, refer to 9.8.8.
11.2.6 Parental controls
Congure the parental control options. To access it, you’ll need to enter the PIN code you set during the initial
TV setup process.
11.2.7 CI card
Display the available menu options of the connected CI cam/card.
11.2.8 Advanced options
• Audio: Adjust your audio preferences such as audio language, second audio language, soundtrack settings
and audio type. Selecting the preferred audio language is particularly important for TV channels that broadcast
in several languages.
• Subtitle:
• Analogue Subtitle: Set this option as O, On or Mute. If Mute option is selected, the analogue subtitle
will be displayed on the screen but the speakers will be muted simultaneously.
• Digital Subtitle: Set this option as O or On.
• Subtitle Tracks: Set your subtitle track preference, if available.
• Digital Subtitle Language: Set one of the listed language options as rst digital subtitle language
preference.
• Second Digital Subtitle Language: Set one of the listed language options as second digital subtitle
language preference. If the selected language in the Digital Subtitle Language option is not available, the
subtitles will be displayed in this language.
• Subtitle Type: Set this option as Normal or Hearing Impaired. If Hearing Impaired is selected, it provides
subtitle services to deaf and hearing impaired viewers with additional descriptions.
• Teletext:
• Digital Teletext Language: Set the teletext language for digital broadcasts.
• Decoding Page Language: Set the decoding page language for teletext display.
• Blue mute: When enabled the screen colour will change to blue when there is no signal detected on a
particular input or channel.
• Nosignalautopowero: Set the time after which the TV goes into Standby mode, provided there is no
signal.
• Default channel: Set your default startup channel preference. When the Select Mode is set to User Select,
the option Show Channels will become available. Highlight and press OK to see the channel list. Highlight a
channel and press OK to select it. Selected channels will be displayed every time the TV is turned back on from
quick standby mode. If the Select Mode is set as Last Status, the last watched channel will be displayed.
• HBBTV settings: Enable or disable HBBTV support, choose tracking options, adjust cookie settings or adjust
device ID settings.
• System information: Display detailed system information on the current channel such as Signal Level,
Signal Quality, Frequency etc.
• Open-source licences: View all information regarding licences.
44